Saturday, July 20, 2013

F-16 Fighting Falcon

F-16 Fighting Falcon

The General Dynamics (now Lockheed Martin) F-16 Fighting Falcon is a single-engine multirole fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF). Designed as an air superiority day fighter, it evolved into a successful all-weather multirole aircraft. Over 4,500 aircraft have been built since production was approved in 1976.[2] Although no longer being purchased by the U.S. Air Force, improved versions are still being built for export customers. In 1993, General Dynamics sold its aircraft manufacturing business to the Lockheed Corporation,[3] which in turn became part of Lockheed Martin after a 1995 merger with Martin Marietta.[4]
The Fighting Falcon is a fighter with numerous innovations including a frameless bubble canopy for better visibility, side-mounted control stick to ease control while maneuvering, a seat reclined 30 degrees to reduce the effect of g-forces on the pilot, and the first use of a relaxed static stability/fly-by-wire flight control system helps to make it a nimble aircraft. The F-16 has an internal M61 Vulcan cannon and 11 locations for mounting weapons and other mission equipment. The F-16's official name is "Fighting Falcon", but "Viper" is commonly used by its pilots, due to a perceived resemblance to a viper snake as well as the Battlestar Galactica Colonial Viper starfighter.[5][6]
In addition to active duty U.S. Air Force, Air Force Reserve Command, and Air National Guard units, the aircraft is also used by the USAF aerial demonstration team, the U.S. Air Force Thunderbirds, and as an adversary/aggressor aircraft by the United States Navy. The F-16 has also been procured to serve in the air forces of 25 other nations.[7]

Lightweight Fighter Program

Main article: Lightweight Fighter program
Experience in the Vietnam War revealed the need for air superiority fighters and better air-to-air training for fighter pilots.[8] Based on his experiences in the Korean War and as a fighter tactics instructor in the early 1960s Colonel John Boyd with mathematician Thomas Christie developed the Energy-Maneuverability theory to model a fighter aircraft's performance in combat. Boyd's work called for a small, lightweight aircraft that could maneuver with the minimum possible energy loss, and which also incorporated an increased thrust-to-weight ratio.[9][10] In the late 1960s, Boyd gathered a group of like-minded innovators that became known as the Fighter Mafia and in 1969 they secured DoD funding for General Dynamics and Northrop to study design concepts based on the theory.[11][12]
Air Force F-X proponents remained hostile to the concept because they perceived it as a threat to the F-15 program. However, the Advanced Day Fighter concept, renamed F-XX gained civilian political support under the reform-minded Deputy Secretary of Defense David Packard, who favored the idea of competitive prototyping. As a result in May 1971, the Air Force Prototype Study Group was established, with Boyd a key member, and two of its six proposals would be funded, one being the Lightweight Fighter (LWF). The Request for Proposals issued on 6 January 1972 called for a 20,000-pound (9,100 kg) class air-to-air day fighter with a good turn rate, acceleration and range, and optimized for combat at speeds of Mach 0.6–1.6 and altitudes of 30,000–40,000 feet (9,100–12,000 m). This was the region where USAF studies predicted most future air combat would occur. The anticipated average flyaway cost of a production version was $3 million. This production plan, though, was only notional as the USAF had no firm plans to procure the winner.[13][14]

Finalists selected and flyoff

Two jet aircraft flying together over mountain range and cloud
A right side view of a YF-16 (foreground) and a Northrop YF-17, each armed with AIM-9 Sidewinder missiles.
Five companies responded and in 1972, the Air Staff selected General Dynamics' Model 401 and Northrop's P-600 for the follow-on prototype development and testing phase. GD and Northrop were awarded contracts worth $37.9 million and $39.8 million to produce the YF-16 and YF-17, respectively, with first flights of both prototypes planned for early 1974. To overcome resistance in the Air Force hierarchy, the Fighter Mafia and other LWF proponents successfully advocated the idea of complementary fighters in a high-cost/low-cost force mix. The "high/low mix" would allow the USAF to be able to afford sufficient fighters for its overall fighter force structure requirements. The mix gained broad acceptance by the time of the prototypes' flyoff, defining the relationship of the LWF and the F-15.[15][16]
The YF-16 was developed by a team of General Dynamics engineers led by Robert H. Widmer.[17] The first YF-16 was rolled out on 13 December 1973, and its 90-minute maiden flight was made at the Air Force Flight Test Center (AFFTC) at Edwards AFB, California, on 2 February 1974. Its actual first flight occurred accidentally during a high-speed taxi test on 20 January 1974. While gathering speed, a roll-control oscillation caused a fin of the port-side wingtip-mounted missile and then the starboard stabilator to scrape the ground, and the aircraft then began to veer off the runway. The GD test pilot, Phil Oestricher, decided to lift off to avoid crashing the machine, and safely landed it six minutes later. The slight damage was quickly repaired and the official first flight occurred on time. The YF-16's first supersonic flight was accomplished on 5 February 1974, and the second YF-16 prototype first flew on 9 May 1974. This was followed by the first flights of the Northrop's YF-17 prototypes on 9 June and 21 August 1974, respectively. During the flyoff, the YF-16s completed 330 sorties for a total of 417 flight hours;[18] the YF-17s flew 288 sorties, covering 345 hours.[19]

Air Combat Fighter competition

Increased interest would turn the LWF into a serious acquisition program. North Atlantic Treaty Organization (NATO) allies Belgium, Denmark, the Netherlands, and Norway were seeking to replace their F-104G fighter-bombers.[20] In early 1974, they reached an agreement with the U.S. that if the USAF ordered the LWF winner, they would consider ordering it as well. The USAF also needed to replace its F-105 and F-4 fighter-bombers. The U.S. Congress sought greater commonality in fighter procurements by the Air Force and Navy, and in August 1974 redirected Navy funds to a new Navy Air Combat Fighter (NACF) program that would be a navalized fighter-bomber variant of the LWF. The four NATO allies had formed the "Multinational Fighter Program Group" (MFPG) and pressed for a U.S. decision by December 1974; thus the USAF accelerated testing.[21][22][23]
YF-16 on display at the Virginia Air and Space Center
To reflect this more serious intent to procure a new fighter-bomber design, the LWF program was rolled into a new Air Combat Fighter (ACF) competition in an announcement by U.S. Secretary of Defense James R. Schlesinger in April 1974. Schlesinger also made it clear that any ACF order would be for aircraft in addition to the F-15, which extinguished opposition to the LWF.[22][23] ACF also raised the stakes for GD and Northrop because it brought in competitors intent on securing what was touted at the time as "the arms deal of the century".[24] These were Dassault-Breguet's proposed Mirage F1M-53, the SEPECAT Jaguar, and the proposed Saab 37E "Eurofighter". Northrop offered the P-530 Cobra, which was similar to the YF-17. The Jaguar and Cobra were dropped by the MFPG early on, leaving two European and the two U.S. candidates. On 11 September 1974, the U.S. Air Force confirmed plans to place an order for the winning ACF design to equip five tactical fighter wings. Though computer modeling predicted a close contest, the YF-16 proved significantly quicker going from one maneuver to the next, and was the unanimous choice of those pilots that flew both aircraft.[25] On 13 January 1975, Secretary of the Air Force John L. McLucas announced the YF-16 as the winner of the ACF competition.[26]
The chief reasons given by the Secretary were the YF-16's lower operating costs, greater range, and maneuver performance that was "significantly better" than that of the YF-17, especially at supersonic speeds. Another advantage of the YF-16 – unlike the YF-17 – was its use of the Pratt & Whitney F100 turbofan engine, the same powerplant used by the F-15; such commonality would lower the cost of engines for both programs.[27] Secretary McLucas announced that the USAF planned to order at least 650, possibly up to 1,400 production F-16s. In the Navy Air Combat Fighter (NACF) competition, on 2 May 1975 the Navy selected the YF-17 as the basis for what would become the McDonnell Douglas F/A-18 Hornet.


Overview

Comparison between F-16's inset cannons; early aircraft had four vents, while later aircraft had two.
The F-16 is a single-engine, very maneuverable, supersonic, multi-role tactical fighter aircraft. The F-16 was designed to be a cost-effective combat "workhorse" that can perform various kinds of missions and maintain around-the-clock readiness. It is much smaller and lighter than its predecessors, but uses advanced aerodynamics and avionics, including the first use of a relaxed static stability/fly-by-wire (RSS/FBW) flight control system, to achieve enhanced maneuver performance. Highly nimble, the F-16 can pull 9-g maneuvers and can reach a maximum speed of over Mach 2.
The Fighting Falcon includes innovations such as a frameless bubble canopy for better visibility, side-mounted control stick, and reclined seat to reduce g-force effects on the pilot. The F-16 has an internal M61 Vulcan cannon in the left wing root and has mulitple locations for mounting various missiles, bombs and pods. It was also the first fighter aircraft purpose built to sustain 9-g turns. It has a thrust-to-weight ratio greater than one, providing power to climb and accelerate vertically.[1]
The F-16 was designed to be relatively inexpensive to build and simpler to maintain than earlier-generation fighters. The airframe is built with about 80% aviation-grade aluminum alloys, 8% steel, 3% composites, and 1.5% titanium. The leading-edge flaps, tailerons, and ventral fins make use of bonded aluminum honeycomb structures and graphite epoxy laminate coatings. The number of lubrication points, fuel line connections, and replaceable modules is significantly lower than predecessors; 80% of access panels can be accessed without stands.[36] The air intake was designed: "far enough forward to allow a gradual bend in the air duct up to the engine face to minimize flow losses and far enough aft so it wouldn't weigh too much or be too draggy or destabilizing."[47]
Although the LWF program called for an aircraft structural life of 4,000 flight hours, capable of achieving 7.33 g with 80% internal fuel; GD's engineers decided to design the F-16's airframe life for 8,000 hours and for 9-g maneuvers on full internal fuel. This proved advantageous when the aircraft's mission changed from solely air-to-air combat to multi-role operations. Since introduction, changes in operational usage and additional systems have increased aircraft weight, necessitating several programs to strengthen its structure.[48]

General configuration

Jet heavily armed with weapons under wings taking off.
F-16CJ of the 20th Fighter Wing at Shaw AFB, South Carolina, armed with a mix of air-to-air missiles, anti-radiation missiles, external fuel tanks and support equipment
The F-16 has a cropped-delta planform incorporating wing-fuselage blending and forebody vortex-control strakes; a fixed-geometry, underslung air intake to the single turbofan jet engine; a conventional tri-plane empennage arrangement with all-moving horizontal "stabilator" tailplanes; a pair of ventral fins beneath the fuselage aft of the wing's trailing edge; a single-piece, bird-proof "bubble" canopy; and a tricycle landing gear configuration with the aft-retracting, steerable nose gear deploying a short distance behind the inlet lip. There is a boom-style aerial refueling receptacle located a short distance behind the canopy. Split-flap speedbrakes are located at the aft end of the wing-body fairing, and an arrestor hook is mounted underneath the fuselage. Another fairing is situated beneath the bottom of the rudder, often used to house ECM equipment or a drag chute. Several later F-16 models, such as the F-16I, also have a long dorsal fairing "bulge" along the "spine" of the fuselage from the cockpit's rear to the tail fairing, it can be used for additional equipment or fuel.[36][49]
Aerodynamic studies in the early 1960s demonstrated that the phenomenon known as "vortex lift" could be beneficially harnessed by the adoption of highly swept wing configurations to reach higher angles of attack through use of the strong leading edge vortex flow off a slender lifting surface. Since the F-16 was being optimized for high agility in air combat, GD's designers chose a slender cropped-delta wing with a leading edge sweep of 40° and a straight trailing edge. To improve maneuverability, a variable-camber wing with a NACA 64A-204 airfoil was selected; the camber is adjusted by leading-edge and trailing edge flaperons linked to a digital flight control system (FCS) regulating the flight envelope.[36][48] The F-16 has a moderate wing loading, which is lower when fuselage lift is considered.[50]
The vortex lift effect is increased by extensions of the leading edge at the wing root (the juncture with the fuselage) known as a strake. Strakes act as an additional elongated, short-span, triangular wing running from the actual wing root to a point further forward on the fuselage. Blended into the fuselage and along the wing root, the strake generates a high-speed vortex that remains attached to the top of the wing as the angle of attack increases, thereby generating additional lift and thus allowing greater angles of attack without stalling. The use of strakes also allows a smaller, lower-aspect-ratio wing, which increases roll rates and directional stability while decreasing weight. Deeper wingroots also increase structural strength and increase internal fuel volume.[48]
Early F-16s could be armed with up to six AIM-9 Sidewinder heat-seeking short-range air-to-air missiles (AAM), including rail launchers on each wingtip. Some F-16s can employ the AIM-7 Sparrow medium-range AAM; more recent versions can equip the AIM-120 AMRAAM. It can also carry other AAM; a wide variety of air-to-ground missiles, rockets or bombs; electronic countermeasures (ECM), navigation, targeting or weapons pods; and fuel tanks on 9 hardpoints – six under the wings, two on wingtips, and one under the fuselage; two other locations under the fuselage are available for sensor or radar pods.[51]






Variants

Aircraft carrying missiles on tips of wings during flight over ocean. Under each wing is a cylindrical external fuel tank with pointed nose
A Portuguese Air Force F-16A outfitted with AIM-9 Sidewinder missiles, AN/ALQ-131 ECM pod, and external fuel tanks.
Main article: General Dynamics F-16 Fighting Falcon variants
F-16 models are denoted by increasing block numbers to denote upgrades. The blocks cover both single- and two-seat versions. A variety of software, hardware, systems, weapons compatibility, and structural enhancements have been instituted over the years to gradually upgrade production models and retrofit delivered aircraft.
While many F-16s were produced according to these block designs, there have been many other variants with significant changes, usually due to modification programs. Other changes have resulted in role-specialization, such as the close air support and reconnaissance variants. Several models were also developed to test new technology. The F-16 design also inspired the design of other aircraft, which are considered derivatives. Older F-16s are being converted into QF-16 drone targets.[103]
F-16A/B
The F-16A (single seat) and F-16B (two seat) were initial production variants. These variants include the Block 1, 5, 10 and 20 versions. Block 15 was the first major change to the F-16 with larger horizontal stabilizers. It is the most numerous F-16 variant with 475 produced.[104]
An Israeli F-16I (Block 52) with conformal fuel tanks (CFTs), internal/integrated Electronic Counter Measures, and other external stores during a Red Flag exercise at Nellis AFB, NV, July 2009
F-16C/D
The F-16C (single seat) and F-16D (two seat) variants entered production in 1984. The first C/D version was the Block 25 with improved cockpit avionics and radar which added all-weather capability with beyond-visual-range (BVR) AIM-7 and AIM-120 air-air missiles. Block 30/32, 40/42, and 50/52 were later C/D versions.[105] The F-16C/D had a unit cost of US$18.8 million (1998).[1] Operational cost per flight hour has been estimated at $7,000[106] to $22,470[107] or $24,000, depending on calculation method.[108]
F-16E/F
The F-16E (single seat) and F-16F (two seat) are newer F-16 variants. The Block 60 version is based on the F-16C/D Block 50/52 and has been developed especially for the United Arab Emirates (UAE). It features improved AN/APG-80 Active Electronically Scanned Array (AESA) radar, avionics, conformal fuel tanks (CFTs), and the more powerful GE F110-132 engine.[109][110]
A United Arab Emirates Air Force F-16E Block 60 with the Northrop Grumman IFTS pod, Conformal Fuel Tanks, and various external armament taking off from the Lockheed Martin plant in Fort Worth, Texas.
F-16IN
For the Indian MRCA competition for the Indian Air Force, Lockheed Martin offered the F-16IN Super Viper.[111] The F-16IN is based on the F-16E/F Block 60 and features conformal fuel tanks; AN/APG-80 AESA radar, GE F110-132A engine with FADEC controls; electronic warfare suite and infra-red searching (IRST); updated glass cockpit; and a helmet-mounted cueing system.[112] As of 2011, the F-16IN is no longer in the competition.[113]
F-16IQ
In September 2010, the Defense Security Cooperation Agency informed the United States Congress of a possible Foreign Military Sale of 18 F-16IQ aircraft along with the associated equipment and services to the newly reformed Iraqi Air Force. Total value of sale is estimated at US$4.2 billion.[114]
F-16V
Lockheed Martin unveiled plans for a new variant of F-16 (which carries a V suffix, referencing to its Viper nickname) at the 2012 Singapore Air Show. George Standridge, vice-president of business development at Lockheed Martin Aeronautics, was quoted to say that the new variant will feature an active electronically scanned array (AESA) radar, a new mission computer and various cockpit improvements; further details revealed that this package can be retrofitted to previous F-16s as well, making these aircraft comparable to the Block 60 variant.



General characteristics
Performance
Armament
Avionics

Posted by at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)